Avocent Network Adapter EMS1000P Guía de usuario Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
3. Enter the username and passphrase in the appropriate fields and click Save.
NOTE: This PPP OPT user will establish PPP connection after being successfully authenticated.
To configure EAP-TLS as PPP authentication for ports with the Dial-in Profile:
1. Select Ports - Serial Ports.
-or-
Select Ports - Auxiliary Ports.
2. Check the box next to the port where the modem is connected and click Set Dial-In.
NOTE: If using an auxiliary port, the modem can be internal.
3. Configure the PPP Address settings. For example, set the PPP Address to Local Configuration using 10.0.0.1
as the Local IPv4 Address and 10.0.0.2 as the Remote IPv4 Address.
4. For PPP Authenticaion, select the button next to By Appliance, and then select the button next to EAP for
the protocol. Click Save.
5. Select Ports - Dial-In Profile - Settings.
6. Use the drop-down menu to enable the PPP Connection and click Save.
7. Copy the certificates and keys to the /etc/ppp/cert file. They must be named server.crt (the ACS 6000
console server certificate), ca.crt (the Certificate Authority’s certificate) and server.key (the ACS 6000
console server asymmetric key).
Dial-out Profile
To configure the Dial-out Profile for a serial port with a connected modem:
1. Select Ports Serial Ports.
2. Click the checkbox for a serial port with a connected modem.
3. Click the Set Dial-out button.
4. Use the drop-down to enable/disable the port.
5. Configure the phone number to dial on-demand in the field Phone No.
6. Use the drop-down to configure the modem speed.
7. Configure the initial chat with modem in the Init Chat field.
8. Configure the PPP parameters (address, authentication and so on) and click Save.
NOTE: The Dial-out profile will work only to establish PPP link on-demand. The administrator must configure static route to have
packages routed to the PPP interface.
Parameter Description
Status
Enables or disables the port.
Default:Disabled.
Table 3.9: Dial-out Parameters
Chapter 3: Accessing the Console Server via the Web Manager 39
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

Comentarios a estos manuales

Sin comentarios