Avocent Network Adapter EMS1000P Guía de usuario descargar pdf (Pagina 33)

• Select Stateless if the link is restricted to the local IP address.

• Select DHCPv6 to have the IPv6 IP address set by the DHCP server.

• Select Static to enter the IPv6 IP address and prefix length manually.

• Select IPv6 address unconfigured to disable IPv6.

6. Select the Ethernet Mode for the built-in interface (ETH0 and ETH1).

NOTE: The MAC Address for the device will be displayed after this option.

NOTE: The following step is only active for mounted Ethernet PC cards.

7. Enter the following Wireless LAN information:

a. Select MyPrivateNet (ESSID) to enter the unique identifier for the wireless access point.

b. Select Channel to enter the communication channel with the access point.

c. Select Encrypted to enable data encryption during transmission.

d. Enter the key or password to decode incoming encrypted data, then click Save.

IPv4 and IPv6 static routes

To add static routes:

1. Select Network - IPv4 Static Routes or IPv6 Static Routes. Any existing static routes are listed with their

Destination IP/Mask, Gateway, Interface and Metric values shown.

2. Click Add.

3. Select Default to configure the default route.

-or-

Select Host IP Or Network to enter custom settings for Destination IP/Mask.

Enter the required Destination IP/Mask Bits with the syntax <destination IP>/<CIDR> in the

Destination IP/Mask Bits field.

4. Enter the IP address of the gateway in the Gateway field.

5. Enter the interface name (Eth0, Eth1 or PPPx) in the Interface field when the route is by interface.

6. Enter the number of hops to the destination in the Metric field, then click Save

Hosts

An administrator can configure a table of host names, IP addresses and host aliases for the local network.

To add a host:

1. Select Network - Hosts.

2. Click Add to add a new host.

3. Enter the IP address, hostname and alias of the host you want to add, then click Save.

Chapter 3: Accessing the Console Server via the Web Manager 25

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

Sin comentarios

Avocent Network Adapter EMS1000P Guía de usuario Pagina 33