Avocent ECMS2000U Guía de usuario descargar pdf (Pagina 16)

10 Emerge Digital Extender System Installer/User Guide

Installation options

CAUTION:To reduce the risk of electric shock or damage to your equipment, disconnect the power from the

ECMS2000 user station by unplugging the power supply from the electrical outlet. To reduce the risk of electric

shock or damage to your equipment, turn on the remote workstation and the ECMS2000 user station in the order

described in the following procedures.

You can install the Emerge digital extender system with the ECMS2000 user station either by a

point-to-point or networked configuration.

Point-to-point installation

The following instructions will enable you to install your Emerge digital extender system in a

point-to-point configuration. In a point-to-point configuration, no administrator setup of the

ECMS2000 transmitter or the ECMS2000 user station is required. This enables you to install the

system quickly, directly out-of-the-box. However, in the point-to-point configuration, you can

install only one ECMS2000 transmitter and ECMS2000 user station pair on a subnet and you must

locate both on the same subnet as well.

Figure 2.1: Point-to-Point Installation (ECMS2000 User Station)

Table 2.1: Figure 2.1 Descriptions

Number Description

1 ECMS2000

Transmitter

2 Remote Workstation

3 ECMS2000 User

Station

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 91 92

Sin comentarios

Avocent ECMS2000U Guía de usuario Pagina 16