Avocent CPS1610 Manual de usuario Pagina 71
- Pagina / 108
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 5: CPS Appliance Commands 57
Server Security command
The Server Security command specifies the authentication method, enables/disables access
methods and enables/disables security lock-out. For more information, see Using Authentication
Methods on page 24, Enabling plain text Telnet and SSH connections on page 19 and Using
security lock-out on page 27.
When you enter this command, you are prompted to confirm or cancel the specified information.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SECURITY [AUTHENTICATION=<auth>] [ENCRYPT=<conns>]
[DSMODE=SECURE|TRUSTALL] [DSCLEAR] [LOCKOUT=<hours>]
Server Set command
The Server Set command changes CPS appliance address information. You may specify one, two
or all three parameters. A reboot is required if you change the IP address.
Table 5.16: Server Security Command Parameters
Parameter Description
AUTHENTICATION=
<auth>
Authentication method. Multiple values may be specified, separated by commas.
Valid values are:
DS Use DSView software server(s) for authentication.
LOCAL Use the local CPS user database to authenticate users.
RADIUS Use the previously defined RADIUS server(s) to authenticate users.
NONE Do not authenticate users. This method cannot be used when SSH access
is enabled, and it cannot be combined with other authentication methods.
Default = LOCAL,DS
ENCRYPT=<conns>
Enables/disables plain text Telnet or SSH connections. To enable both, specify both
values, separated by a comma. Valid values are:
SSH Enables SSH connections.
None Enables plain text Telnet connections.
Default = None
DSMODE=SECURE|
TRUSTALL
Specifies the mode when DSView software authentication is used. Secure indicates
authentication will be locked to one DSView software server after initial access, and
DSView software server and appliance credentials will be stored. Trustall indicates
that any DSView software server may be used for authentication, and DSView
software server credentials will not be stored or validated.
DSCLEAR
Clears any stored credentials used by the DSView software, including the
DSMode setting.
LOCKOUT=<hours>
Enables or disables security lock-out. To enable, specify the number of hours in the
lock-out period, in the range 1-99. To disable, specify a zero value.
Default = 0 (disabled)
- Installer/User Guide 1
- CPS810/1610 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 9
- List of Tables 11
- List of Tables xi 13
- Product Overview 15
- Safety Precautions 16
- Using DSView Software 17
- Hardware Overview 19
- Configuring the CPS Appliance 21
- Initial CPS appliance login 23
- Operations 25
- Power None 26
- Parameter Value 26
- Connecting to Serial Devices 27
- Authentication Complete 28
- Connected to Port: 28
- SERVER CLI CONNECT=ON 28
- Y to confirm or N to cancel 30
- Ending Device Sessions 34
- Session time-out 35
- Preemption 35
- Managing User Accounts 36
- Access rights and levels 37
- Using Authentication Methods 38
- Authentication summary 40
- Using security lock-out 41
- ALL. To 45
- Using CPS Appliance Commands 49
- Understanding Conventions 50
- Command Summary 52
- CPS Appliance Commands 57
- Help Command 58
- Port Commands 58
- Port Alert Add command 59
- Port Alert Copy command 59
- Port Alert Delete command 60
- Port Break command 60
- Port History command 60
- Port Logout command 61
- Port Set command 61
- Port Set In/Out command 63
- Quit Command 64
- Resume Command 64
- Server Commands 65
- Server FLASH command 67
- Server Ping command 68
- Server PPP command 68
- Server RADIUS command 69
- Server Reboot command 70
- Server Security command 71
- Server Set command 71
- Server SNMP command 72
- Server SNMP Community command 72
- <name> 73
- =<name> 73
- Server SSH command 75
- Show Commands 76
- Show Port Alert command 78
- Show Port In 78
- Show Server command 78
- Show Server CLI command 79
- Show Server PPP command 80
- Show Server RADIUS command 80
- Show Server Security command 80
- Show Server SNMP command 81
- Show User command 81
- SPC Command 83
- User Commands 84
- Examples 85
- User Delete command 86
- User Logout command 86
- User Set command 86
- User Unlock command 88
- APPENDICES 89
- Appendix B: Device Cabling 91
- Reversing Adaptors and Cables 93
- Figure B.3 94
- Appendices 81 95
- Appendix C: Supported Traps 96
- Appendices 83 97
- Appendix D: Ports Used 99
- Appendix E: Technical Support 100
- Index 89 103
- Index 91 105
Relacionado con productos y manuales para Redes Avocent CPS1610
Redes Avocent CCM Manual de usuario
(4 paginas)
(4 paginas)
Redes Avocent HMX Manager Guía de usuario
(48 paginas)
(48 paginas)
Redes Avocent Cyclades CS Guía de usuario
(65 paginas)
(65 paginas)
Redes Avocent Network Device SPC420 Manual de usuario
(575 paginas)
(575 paginas)
Redes Avocent ECMS2000U Guía de usuario
(92 paginas)
(92 paginas)
Redes Avocent 5224 Guía de usuario
(88 paginas)
(88 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 1.621 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales