Avocent CPS1610 Manual de usuario Pagina 41
- Pagina / 108
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3: Operations 27
You must specify the server’s IP address, the UDP port to be used and a “secret” to be used.
You must also specify a user-rights attribute value that matches a value in the RADIUS
server’s dictionary.
You may also use this command to delete a RADIUS server definition.
SERVER RADIUS PRIMARY|SECONDARY DELETE
For more information, see Server RADIUS command on page 55.
2. Issue a Server Security command, using the Authentication parameter to specify the authenti-
cation method. Use the Encrypt parameter to enable plain text Telnet connections, SSH con-
nections or both.
SERVER SECURITY AUTHENTICATION=<auth> ENCRYPT=<conns>
When SSH session access is enabled, you must specify an authentication method other
than None.
3. You are prompted to save the information. Enter
Y to confirm or N to cancel.
To enable or disable authentication of serial CLI port sessions:
Issue a Server CLI command, using the Auth parameter to enable/disable serial CLI port
authentication and the Preempt parameter to specify the preemption level.
To clear stored DSView software authentication credentials:
Issue a Server Security command, using the DSClear parameter. This clears any stored credentials
used by the DSView software.
To display authentication configuration information:
1. Issue a Show Server Security command.
SHOW SERVER SECURITY
The display includes the current CPS appliance authentication settings that were configured
with the Server Security command. If SSH access has been enabled, the display indicates
SSH2. Regardless of whether SSH is enabled, the display includes the authentication method
specified with the Server SSH command.
2. To display CPS RADIUS settings that were configured with the Server RADIUS command,
issue a Show Server RADIUS command.
SHOW SERVER RADIUS
For more information, see Server Security command on page 57, Show Server Security command
on page 66, Show Server RADIUS command on page 66 and Connecting to devices using SSH on
page 16.
Using security lock-out
When the security lock-out feature is enabled, a user will be locked-out after five consecutive
authentication failures. A successful authentication will reset the counter to zero. You may
- Installer/User Guide 1
- CPS810/1610 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 9
- List of Tables 11
- List of Tables xi 13
- Product Overview 15
- Safety Precautions 16
- Using DSView Software 17
- Hardware Overview 19
- Configuring the CPS Appliance 21
- Initial CPS appliance login 23
- Operations 25
- Power None 26
- Parameter Value 26
- Connecting to Serial Devices 27
- Authentication Complete 28
- Connected to Port: 28
- SERVER CLI CONNECT=ON 28
- Y to confirm or N to cancel 30
- Ending Device Sessions 34
- Session time-out 35
- Preemption 35
- Managing User Accounts 36
- Access rights and levels 37
- Using Authentication Methods 38
- Authentication summary 40
- Using security lock-out 41
- ALL. To 45
- Using CPS Appliance Commands 49
- Understanding Conventions 50
- Command Summary 52
- CPS Appliance Commands 57
- Help Command 58
- Port Commands 58
- Port Alert Add command 59
- Port Alert Copy command 59
- Port Alert Delete command 60
- Port Break command 60
- Port History command 60
- Port Logout command 61
- Port Set command 61
- Port Set In/Out command 63
- Quit Command 64
- Resume Command 64
- Server Commands 65
- Server FLASH command 67
- Server Ping command 68
- Server PPP command 68
- Server RADIUS command 69
- Server Reboot command 70
- Server Security command 71
- Server Set command 71
- Server SNMP command 72
- Server SNMP Community command 72
- <name> 73
- =<name> 73
- Server SSH command 75
- Show Commands 76
- Show Port Alert command 78
- Show Port In 78
- Show Server command 78
- Show Server CLI command 79
- Show Server PPP command 80
- Show Server RADIUS command 80
- Show Server Security command 80
- Show Server SNMP command 81
- Show User command 81
- SPC Command 83
- User Commands 84
- Examples 85
- User Delete command 86
- User Logout command 86
- User Set command 86
- User Unlock command 88
- APPENDICES 89
- Appendix B: Device Cabling 91
- Reversing Adaptors and Cables 93
- Figure B.3 94
- Appendices 81 95
- Appendix C: Supported Traps 96
- Appendices 83 97
- Appendix D: Ports Used 99
- Appendix E: Technical Support 100
- Index 89 103
- Index 91 105
Relacionado con productos y manuales para Redes Avocent CPS1610
Redes Avocent CCM Manual de usuario
(4 paginas)
(4 paginas)
Redes Avocent HMX Manager Guía de usuario
(48 paginas)
(48 paginas)
Redes Avocent Cyclades CS Guía de usuario
(65 paginas)
(65 paginas)
Redes Avocent Network Device SPC420 Manual de usuario
(575 paginas)
(575 paginas)
Redes Avocent ECMS2000U Guía de usuario
(92 paginas)
(92 paginas)
Redes Avocent 5224 Guía de usuario
(88 paginas)
(88 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 5.375 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales