Avocent® ACS6000 Advanced Console ServerCommand Reference Guide
6...Avocent® ACS6000 Advanced Console ServerCommand Line SyntaxNOTE: Square brackets ([]) denote an optional element. Each element is separated by
Introduction, Navigation and Commands...7
Introduction, Navigation and Commands...8
CLI Command SetCommands Used for the CLIThis chapter describes the general commands used when accessing the console server with thecommand line interf
10...Avocent® ACS6000 Advanced Console ServeraddAdd a node.Syntax:--:- / cli-> add <Path>Example:--:- / cli-> add network/hosts--:#- [h
CLI Command Set...11Example:--:- access cli-> cd /Moves to the top level and displays the following:--:- / cli->Example:--:- access cli-> c
12...Avocent® ACS6000 Advanced Console ServerType the hotkey to suspend the connection:Ctrl + zNOTE: The connect, sniff and share commands allow yo
CLI Command Set...13-or-Type the hotkey to suspend the connection:Ctrl + zdisconnectUse the text session hot key to suspend the target session and r
14...Avocent® ACS6000 Advanced Console ServersetSet a parameter.Syntax:--:- / cli-> set <Path> <Parameter>=<Value>After a para
CLI Command Set...15lsShow the available directories or subnodes at the current location.Syntax:--:- / cli-> lsExample:--:- / cli-> ls authent
Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service marks of Emerson ElectricCo. Avocent, the Avocent logo and
16...Avocent® ACS6000 Advanced Console Server--:- eth0 cli-> list_configurationecho offcd /network/devices/eth0batch_modeset status=enabledset i
CLI Command Set...17--:- / cli-> cd access/<PDU_ID>2. Launch the power command with a specific outlet (number or name), range of outlets (u
18...Avocent® ACS6000 Advanced Console ServerNOTE: Use this command to restart the sequence number.Syntax:--:- / cli-> opiepasswd -f -c <user
CLI Command Set...19list_shared_sessionList the users connected to the shared serial port.Syntax:--:- <serial_port_ID> cli-> list_shared_se
20...Avocent® ACS6000 Advanced Console Server--:- / cli -> show_appliance_databufThe following commands are available for show data buffering:•
CLI Command Set...21--:- settings cli-> showhostname = ACS6048primary_dns = 110.126.129.4secondary_dns =domain = corp.tst.comenable_ipv6 = noenab
CLI Command Set...22
Port Access and Configuration ExamplesBy default, all serial ports and the AUX/Modem port are disabled. An administrator must enableand configure the
24...Avocent® ACS6000 Advanced Console ServerField DescriptionFor ApplianceName Name assigned to the appliance (for example, ACS6048-1357908642)Por
Port Access and Configuration Examples...25--:- access cli->lsACS6016-0011223344/21-67-72-p-1/21-67-72-p-2/21-67-72-p-4/myPDU/Type show to see th
iTABLE OF CONTENTSIntroduction, Navigation and Commands1Access Options and How to Log Into the CLI2Configuration Tasks Performed With the CLI3CLINavi
26...Avocent® ACS6000 Advanced Console Serverfremont-techpubs login: fredPassword:Last login: Tue Oct 2 13:09:04 2007 on :0Linux fremont-techpubs 2
Port Access and Configuration Examples...27Manage Power for a Device Connected to an Outlet on aPDUSee cycle, on, off, lock and unlock on page 16 fo
28...Avocent® ACS6000 Advanced Console Server--:#- [serial_ports/physical] cli->4. Enter set status=enabled, then enter show and save as shown t
Port Access and Configuration Examples...294 ttys4 21-67-72-p-4 cas 9600_8N1_telnet-ssh_local5 ttys5 21-67-72-p-5 cas 9600_8N1_telnet-ssh_local6 tty
Port Access and Configuration Examples...30
CLI Overview for AdministratorsThis chapter describes using the Command Line Interface (CLI) for administrators. Onlyadministrators and authorized use
32...Avocent® ACS6000 Advanced Console ServerSystem Navigation Treeidle_timeout =rpc =port access =session =port_access_kill_multi_session =port_ac
CLI Overview for Administrators...33Date and Time Navigation Treedate_and_timedate_and_timesettings=day=hour=minute=month=second=year=time_zone=Date
34...Avocent® ACS6000 Advanced Console Server--:- / cli-> cd system/generalTo set the login banner:1. Enter the following command.--:- / cli>
CLI Overview for Administrators...35System/UsageEnter cd system/usage to navigate to the Usage level.--:- / cli> cd system/usage/Usage Navigation
ii...Avocent® ACS6000 Advanced Console ServerAccessing Serial Ports using ts_menu26Manage Power for a Device Connected to an Outlet on a PDU27Port
36...Avocent® ACS6000 Advanced Console ServerNetwork Navigation Treeprimary_dns=secondary_dns=enable_ipv6=get_dns_from_dhcpv6=get_domain_from_dhcpv
CLI Overview for Administrators...373. Enter set ipv<4|6>_address=<IP_Address> ipv<4|6>_mask=<netmask> to set the IPaddress
38...Avocent® ACS6000 Advanced Console Server--:#- [hosts] cli->4. Enter set hostname=<hostname> ip=<IP_address> to add the name of
CLI Overview for Administrators...39Network/FirewallEnter cd network/firewall to navigate to the firewall level.--:- / cli-> cd network/firewallN
40...Avocent® ACS6000 Advanced Console ServerWiz commandThe wiz command allows administrators to easily and quickly perform the initial networkconf
CLI Overview for Administrators...41Other hints:- Use backslash '\' to escape spaces, '\' and other controlcharacters when assig
42...Avocent® ACS6000 Advanced Console ServerPorts Navigation Treepool_members=dial-in_profilesecure_dial-incallback_userssettingslog_in_to_applian
CLI Overview for Administrators...43enable_cisco_rj45_pin-out = nostatus = enabledspeed = 9600parity = nonedata_bits = 8stop_bits = 1flow_control =
44...Avocent® ACS6000 Advanced Console ServerIf no internal modem is installed, the port name is ttyA1. If an internal modem is installed, the port
CLI Overview for Administrators...45UsersEnter cd users to navigate to the users level.--:- / cli-> cd usersUsers Navigation Treelocal_accountsus
Introduction, Navigation and CommandsThe Avocent® ACS 6000 advanced console server is a 1U appliance that serves as a single pointfor access and admin
46...Avocent® ACS6000 Advanced Console ServerEvents_and_Logs Navigation Treeevent listevent destinationssyslogsnmp trapsmsemaildsviewtrap_forwardda
CLI Overview for Administrators...47Option Descriptionpdusshow up in the PDUs node when they are discovered. Only power control opearation is suppor
48...Avocent® ACS6000 Advanced Console Server--:- / cli-> cd active_sessions--:- active_sessions cli->2. Enter show. Information displays as
AppendicesEnabling Firmware Upgrades When the Boot Image is notin FlashTo enable firmware upgrades when the boot image is not in Flash:1. Connect to t
Appendices...50
...51Migration CLIThe Migration CLI is a tool that allows you to configure an ACS 6000 console server that is runningscripts based in the ACS advanc
52...Avocent® ACS6000 Advanced Console ServerCommand Value or Descriptionsbackupconfigsaveto sdN/AupgradefwcheckumN/Aapplicationconnect N/Apm N/Avi
...53Command Value or Descriptionsprotocol bidirectionaltelnet, consoleraw, cslip, local, rawsocket, slip, sshv1, sshv2, telnetconfig physicalports
54...Avocent® ACS6000 Advanced Console Server
...55Su and Sudo CommandsThe su and sudo commands allow a user to execute commands as a different user.Su commandUsing the su (switch user) command,
2...Avocent® ACS6000 Advanced Console ServerNumber Description1Serial Port 1.Serial ports are also referred to with tty device names, such as ttSy1
56...Avocent® ACS6000 Advanced Console Server# groups <username>To delete a member from the wheel group:1. Edit the file /etc/group.2. Remove
...57PARTTIMERS ALL = SHUTDOWN, REBOOTIn the preceding example, the users millert, mikef and dowdy can execute the kill, shutdown, rebootand su comm
...59Technical SupportOur Technical Support staff is ready to assist you with any installation or operational issues youencounter with your Avocent
...60
About Emerson Network PowerEmerson Network Power, a business of Emerson (NYSE:EMR), delivers software, hardware and services that maximizeavailability
Introduction, Navigation and Commands...3NOTE: The default password for admin is avocent and for root is linux. The password for these users mayhave
4...Avocent® ACS6000 Advanced Console ServerAt any CLI prompt at any level, if you type cd and press Tab Tab, the navigation options (pathelements)
Introduction, Navigation and Commands...5---:- system_tools cli->If you know the path, you can enter multiple path elements in a single command s
Comentarios a estos manuales