Avocent MERGEPOINT SP MANAGER Guía de usuario descargar pdf (Pagina 58)

46 MergePoint 5224/5240 Service Processor Manager User Guide

Managing Native IP

Tasks for creating secure tunnels and obtaining native IP access on page 8 describes tasks for

creating the secure tunnel that must exist between the user’s workstation and the MergePoint 5224/

5240 SP manager before an authorized user can enable Native IP and the Go to native web interface

can be active. Figure 3.8 shows an example of a HP iLO web interface as it might appear after an

authorized user has the needed tunnel and clicks the Go to native web interface link.

Figure 3.8: Example HP iLO Native Web Interface

CAUTION: When finished with management tasks performed using native IP, the authorized user should always

click the Disable link. Leaving native IP enabled creates a security risk.

To enable access to Native IP on a target device (Web Manager):

1. Create a secure tunnel between your workstation to the MergePoint 5224/5240 appliance. See

Tasks for creating secure tunnels and obtaining native IP access on page 8 for overview and

Creating VPN connections for Native IP access on page 49 for how to create a VPN tunnel.

2. If the VPN connection is made using IPSec, enter the IP address that is assigned to the public

interface into a browser to bring up the Web Manager.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Sin comentarios

Avocent MERGEPOINT SP MANAGER Guía de usuario Pagina 58