Avocent PM3000 Guía de usuario descargar pdf (Pagina 23)

• Command Prompt

• Browser or text based menu

For information about integrated use with an Avocent management device visit,

www.avocent.com or refer to the appropriate product documentation.

Default configuration parameters

The PM PDU’s default configuration is as follows:

• User is admin

• Admin user’s password is pm8

NOTE: The pm8 password is valid only for the console and is used by the main PM PDU in a chain to log in to

chained PM PDUs.

• All outlets are named. The default name is PDU id_<outlet number>

• All outlets are unassigned to user

• All outlets are turned on

• All outlets are unlocked

Recovering the PM PDU password

To recover the PM root password:

1. Connect directly to the PM PDU’s console port.

2. Press the power reset button or power cycle the PM PDU.

3. Type Ctrl-C to access the uboot prompt.

4. Type hw_boot single and press Enter.

5. The PM PDU will boot into single-user mode. Type passwd and press Enter.

6. Enter the new password and confirm.

7. Type reboot and let the unit boot normally.

Chapter 2: Installation 15

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 116 117

Sin comentarios

Avocent PM3000 Guía de usuario Pagina 23