Avocent PM 3000 Guía de usuario descargar pdf (Pagina 13)

Installation

Getting Started

Before installing your Avocent PM PDU, refer to the following list to ensure you have all items

shipped with the PDU, as well as other items necessary for proper installation.

Supplied with the PM PDU

• PM PDU Quick Installation Guide (QIG)

• Security Warning Card

•Power Cord

• RJ-45 to RJ-45 straight-through CAT 5 cable

• RJ-45 to DB-9F straight-through adaptor

• RJ-45 adaptor

• Mounting brackets, screws and cord retention clips

• Keyhole mounting kit

NOTE: If your PM PDU model does not have a fixed power input cable, it may ship with a modular cable.

Depending on your site’s location, the modular input power cables included in the box vary.

Additional items needed

If you are configuring the PM PDU in a standalone configuration, you will also need the following

items:

• One or more RJ-45 to RJ-45 CAT 5 straight-through cables

• An RJ-45 to DB-9F straight-through adaptor

• A PC running a terminal emulation program

Rack Mounting the PM PDU

You may rack mount the PM PDU or place it on a desktop or other flat surface. A horizontal PM

PDU can be mounted in a 1U fashion using the included brackets. It can be mounted on either the

front or back to display outlets and LEDs on either the front or rear of the rack. A vertical PM PDU

CHAPTER

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 107 108

Sin comentarios

Avocent PM 3000 Guía de usuario Pagina 13