Avocent Access Router Cyclades-PR2000 Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 136
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
Cyclades-PR2000
Chapter 9 - Routing Protocols 66
Unnumbered
Interfaces
Point-to-Point Connection
Slot 1
ETH0
ETH0
Slot 3
Router 1
10.0.0.3
192.168.100.1
Router 2
A
B
E
F
Network 3
Network 1
FIGURE 9.2 STATIC ROUTING EXAMPLE 2
Figure 9.2 shows another static routing example to explain the
Gateway
or
Interface
parameter. Between the two
routers is a point-to-point connection. Another network could be created, but is not necessary. Both routers can
be assigned unnumbered interfaces, because everything that leaves one router is sent to the other.
To define static routes, enter the menu CONFIG =>STATIC ROUTES =>IP =>ADD ROUTE. A description of the
parameters in this menu, with the configuration for Router 1 in the examples above, is given in the table that
follows.
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 135 136

Comentarios a estos manuales

Sin comentarios