Avocent Server ACS 6000 Manual de usuario descargar pdf (Pagina 24)

--:- <PDU_ID> cli-> [cycle|on|off]<outlet number>,<outlet number>

To power control (on, off, cycle, lock, unlock) outlets of one specific PDU under the

power management level:

1. Go to the outlet level for the specific PDU.

--:- / cli-> cd power_management/pdus/<PDU_ID>/outlets

2. Launch the power command with a specific outlet number, range of outlets (use a hyphen

to specify the range) or list of outlets (number or name separated by a comma).

--:- outlets cli-> [cycle|on|off] [<outlet number>]

-or-

--:- outlets cli-> [cycle|on|off] <outlet number>-<outlet number]

-or-

--:- outlets cli-> [cycle|on|off] <outlet number>,<outlet number>

passwd

Configure the password for the current user. The terminal does not echo the password.

Syntax:

--:- / cli-> passwd

opiepasswd

Configure a one time password (OTP) for the local user. After you type the command, you will

be asked for the pass phrase to use for the OTP.

NOTE: Use this command to restart the sequence number.

Syntax:

--:- / cli-> opiepasswd -f -c <username>

Example:

opiepasswd -f -c teste

Adding teste:

Only use this method from the console; NEVER from remote. If you are

using telnet, xterm, or a dial-in, type ^C now or exit with no password.

Then run opiepasswd without the -c parameter.

Using MD5 to compute responses.

Enter new secret pass phrase:

Again new secret pass phrase:

ID teste OTP key is 499 AC0241

FOOD HUGH SKI ALMA LURK BRAD

16 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 72 73

Sin comentarios

Avocent Server ACS 6000 Manual de usuario Pagina 24