Avocent Server ACS 6000 Manual de usuario

CYCLADES™ ACS 6000Command Reference Guide

Figure 1.1: Console Server PortsNumber Description1Serial Port 1NOTE: Serial ports are also referred to with tty device names, such as ttSy1, ttyS2 an

• Through a local terminal or a computer that has a terminal emulation program connected tothe console port of the console server with session setting

For example, in the web manager, user configuration is done when an administrator selects -Users - Local Accounts - User Names to get to the User Name

--:- / cli-> cd system_toolsA prompt like the following appears at each level:--:- system_tools cli->NOTE: CLI commands are case sensitive.At an

--:- / cli-> cd accessIf you then press Enter, you are changed to the access level, and the access level promptappears.--:- access cli->The foll

Section_LabelParam_LabelValue_text := labels or data from the UIC.Syntax used:^ : beginning of the element* : 0 - many| : or() : groupChapter 1: Intro

8 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

CLI Command Set29Commands Used for the CLIThis chapter describes the general commands used when accessing the console server with thecommand line inte

characters when assigning values to parameters.addAdd a node.Syntax:--:- / cli-> add <Path>Example:--:- / cli-> add network/hosts--:#- [ho

--:- access cli-> cd /informationDisplays the following:--:- information cli->pwdDisplay the path to the current level (print working directory)

FCC Warning StatementThe Cyclades™ ACS 6000 advanced console server has been tested and found to complywith the limits for Class A digital devices, pu

Displays the following:Password:-or-Type the hotkey to suspend the connection:Ctrl + zshareConnect to a serial port as an additional, read/write user.

--:- / cli-> ftp [<server_IP_address>|<hostname>]NOTE: You must log into the CLI as root to have full control over the local directory

lsShow the available directories or subnodes at the current location.Syntax:--:- / cli-> lsExample:--:- / cli-> ls authenticationappliance_authe

set ipv4_method=dhcp#set ipv4_method=static #ipv4_address=192.168.160.10 #ipv4_mask=255.255.255.0#set ipv4_method=ipv4_address_unconfigured#set ipv6_m

--:- <PDU_ID> cli-> [cycle|on|off]<outlet number>,<outlet number>To power control (on, off, cycle, lock, unlock) outlets of one s

wizConfigures the IP parameters for the Eth0 interface. Shows the current configuration and asksfor new values for the following parameters:• Status o

--:- <serial_port_ID> cli-> sendmsg admin@139 You are beingterminated.show_databuf and show_appliance_databufView the data buffer files for t

CLI Equivalent Actions to Web Manager Checkbox SelectionNOTE: The following example procedure, which configures IPv6, illustrates the actions to use i

domain = corp.tst.comenable_ipv6 = yesget_dns_from_dhcpv6 = noget_domain_from_dhcpv6 = noenable_bonding = no7. Enter commit.20 Cyclades™ ACS6000

Port Access and ConfigurationExamples321By default, all serial ports and the AUX/Modem port are disabled. An administrator must enableand configure th

Cyclades™ ACS6000Command Reference GuideAvocent, the Avocent logo, The Power of Being There, Cyclades and DSView aretrademarks or registered trademar

View Information About the Console Server and ConnectedDevicesWhen a regular user or an administrator enters show at the Access level, information abo

Field DescriptionFor OutletsEnter cd <PDU_ID>/outlets and enter show to see list of outlets and the actions thatcan be taken (commands that can

Connect to a Device Console Connected to a Serial PortThe following procedure is an example of how an administrator or an authorized user canconnect t

ts_menu options-u <user> [-l] [-ro] <console port>Parameter Description-u <user>Invokes ts_menu as the user named by <user>. T

To set up a console access service (CAS) port:1. Log onto the CLI as an administrator.--:- / cli->2. Enter set_cas ports/serial_ports/ followed by

2. Enter show to view the configuration of port 3.--:- serial_ports/physical cli-> showSelected items: 3Port: 3enable_cisco_rj45_pin-out = nostatus

Type ls to see available sub-nodes28 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

CLI Overview for Administrators429This chapter describes using the Command Line Interface (CLI) for administrators. Onlyadministrators and authorized

System/SecurityEnter cd security to navigate to the security level.--:- / cli-> cd system/securitySystem Navigation Treesecurity_profileidle_timeou

System Navigation Treehttp_port=enable_https_sessionhttps_ssl_version=https_port=https_minimum_cipher_suite_level=redirect_http|https=dsviewall_applia

Symbols UsedNOTE: The following symbols may appear within the documentation or on the appliance.InstructionsThis symbol is intended to alert the user

Date and Time Navigation Treeyear=time_zonepredefinedzone=setSystem/Help and LanguageEnter cd system/help_and_language to navigate to the online_help

--:- / cli> cd system/general/2. Enter the following command.--:- general cli-> set enable_login_banner=yes**:- general cli> set login_banner

Usage Navigation Treeflash usagememoryTable 4.5: System/Usage OptionsNetwork1. Enter cd network to navigate to the Network level--:- / cli-> cd net

Network Navigation Treeprimary_dns=secondary_dns=enable_ipv6=get_dns_from_dhcpv6=get_domain_from_dhcpv6=enable_ipv4_multiple_routing_tables=Network/IP

1. Enter cd network/devices/<eth0|eth1>/settings to navigate to the Settings level for thedesired interface.--:- / cli-> cd network/devices/e

127.0.0.1ip: 127.0.0.1hostname: localhostalias:127.0.0.1/3. Type add then press Return.--:- hosts cli-> add<Return>--:#- [hosts] cli-> lsi

--:- 172.26.31.164 cli-> showip: 172.26.31.164hostname = sharedacs6000alias =Hosts Navigation Treehosts127.0.0.1alias=hostname=Table 4.9: Network/H

--:- / cli-> cd network/ipsec(vpn)IPSec(VPN) Navigation Treeipsec(vpn)Table 4.11: Network/IPSec(VPN) OptionsNetwork/SNMPEnter cd network/snmp to na

ipv6_method = ipv6_address_unconfiguredipv6_address =ipv6_prefix_length =ipv6_default_gateway =MAC Address: 00:e0:86:21:67:72dns:primary_dns = 172.26.

Ports Navigation Treeauto_discovery_timeout_(seconds)=default_speed_on_auto_discovery_failure=probe_speed_115200=probe_speed_1200=probe_speed_19200=pr

T A B L E  OF  C ON T E N T SIntroduction, Navigation and Commands 1Access Options and How to Log Into the CLI 2Configuration Tasks Performed With t

Ports Navigation Treeotp_login_authentication=ppp_connection=ppp|pap_authentication=Command Summaryset_casEdits the command to configure a list of ser

status = enabledspeed = 9600parity = nonedata_bits = 8stop_bits = 1flow_control = noneType ls to see availables sub-nodes.--:#- [serial_ports/physical

--:- auxiliary_ports cli-> showDevice Name: ttyM1status = disabledspeed = 38400init_chat = "" \d\d\d+++\d\d\dATZ OKppp_address = no_addre

AuthenticationEnter cd authentication to navigate to the authentication level.--:- / cli-> cd authenticationNOTE: Kerberos does not work unless the

Users Navigation Treepassword_rulespassword enforcementdefault expirationauthorizationgroupsadminappliance-adminuserTo add a user and password:1. Ente

Syslog Navigation Treeremote_server_ipv4server_ip_or_hostname (to specify multiple servers, separate the entries with commas)remote_server_ipv6server_

Events_and_Logs Navigation Treenfs_path=segment_size_(kbytes)=spare_segments=syslog_data_buffering_settingssyslog_facility=sensorscurrent_temperature:

3. Enter set newpdu_id=<new_PDU_ID>.--:#- [pdus] cli-> set new_pdu_id=mypdu--:#- [pdus] saveNOTE: See the Cyclades ACS 6000 Installation/Admi

client_ip: nonecreation_time: Tue Dec 18 03:31:01 2007session_type: consoleconnection_type: clitarget_name:id: 37parent_id:--:- active_sessions cli-&g

51Appendix A: Enabling Firmware Upgrades When the BootImage is not in FlashTo enable firmware upgrades when the boot image is not in Flash:1. Connect

wiz 17Special Multi-session Commands 17list_shared_session 17kill_shared_session 17sendmsg 17show_databuf and show_appliance_databuf 18cleandbuf and c

52 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

Appendix B: Migration CLIThe Migration CLI is a tool that allows you to configure an ACS 6000 console server that isrunning scripts based in the ACS a

Command Value or Descriptionsadministrationbackupconfig loadfrom sd N/Abackupconfig saveto sd N/Aupgradefw checkum N/Aapplicationconnect N/Apm N/Aview

Command Value or Descriptionsdelete N/Amenutitle N/Aconfig network hostSettingssecipaddress <nnn.nnn.nnn.nnn>secsubnetmask <nnn.nnn.nnn.nnn&g

Command Value or Descriptionssttyoptions <stty options>tcpkeepalive <number>terminaltypeaixterm, att6386, linux-lat, vt100, vt320,xtermcol

Command Value or Descriptionssecurity authenticationauthtype Otp, Otp/Localpppauthtype Otp, Otp/Localtimeout-t<time> Time-out in minutes-T Disab

58 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

Appendix C: Su and Sudo CommandsThe su and sudo commands allow a user to execute commands as a different user.Su commandUsing the su (switch user) com

# groups <username>To delete a member from the wheel group:1. Edit the file /etc/group.2. Remove the username from the line with wheel::XX:<u

In the preceding example, the users millert, mikef and dowdy can execute the kill, shutdown,reboot and su commands while the users bostley, jwfox and

Network/SNMP 39Wiz command 39Ports 40Auxiliary ports 43Pluggable Devices 44Authentication 45Users 45Syslog 46Events_and_Logs 47Power Management 48Acti

62 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

Appendix D: Technical SupportOur Technical Support staff is ready to assist you with any installation or operational issuesyou encounter with your Avo

64 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

590-770-501EFor Technical Support:www.avocent.com/support

v Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

Introduction, Navigation andCommands11The Cyclades™ ACS 6000 advanced console server is a 1U appliance that serves as a singlepoint for access and adm