Avocent DSView 3 Guía de usuario descargar pdf (Pagina 35)

Chapter 3: Basic Operations 29

2. Move the slider to the Best Color position.

- or -

Move the slider to the middle position.

- or -

Move the slider to the Best Compression position.

- or -

Select the Grayscale Video checkbox.

3. Click OK to apply your changes.

Accessing Target Devices

You may access one or more target devices within a DS series appliance at the

same time. To access multiple target devices, double-click on every port that

you wish to display. Windows may be tiled or cascaded as you choose.

NOTE: When tiling windows from the Node Manager, each remote session must be in Full Scale

mode in order for windows to tile properly. By default, the scaling mode is speciﬁ ed as Auto Scale.

To change the scaling mode, select Video - Scaling - Full Scale in the remote session window.

To access a target device:

1. Load the DSView software. This will display the Node Manager and provide

you with a list of target devices that you may access.

2. Double-click on the target device that you wish to access. This will open a

remote session window and allow the DS user control of the target device.

NOTE: If you are using the DSR DVC upgrade and have not set the color depth, the Video Settings

dialog box appears and you must set a color depth. See Setting the color depth earlier in this chapter

for more information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 107 108

Sin comentarios

Avocent DSView 3 Guía de usuario Pagina 35