Avocent AMX Switch Series Guía de usuario descargar pdf (Pagina 56)

46 AMX Switch Series Installer/User Guide

All AMX5000 or AMX5010 switches that are part of the same AMX configuration must have the

same configuration ID.

Set the IDs of all AMX switching system configurations that will be connected to the same subnet

as shown in the following table. Continue this numbering system for all other AMX switching

system configurations connected to the same subnet.

Set/Change Password

You can set the AMX switch to a secure mode so that the Terminal Applications menu cannot be

accessed without first entering a password.

To activate security:

1. Select the Set/Change Password menu option. You will be prompted to decide if you wish to

continue. Enter a

2. Type a password for this AMX switch and press Enter. This password may be up to eight

characters long.

3. You will be prompted to re-type the password. After completing this step, security will be active

and you will not be able to access AMX switch terminal operations without the password.

To change the password:

Select the Set/Change Password menu option. You will be prompted to type the old password and

a new one. Re-enter the new password to verify.

CAUTION: This password places your AMX switch terminal in a secure mode. This password should be guarded

like any network password and care should be taken to avoid forgetting or misplacing it. Should you lose your

password, please contact Avocent Technical Support for assistance.

SNMP Configuration

The SNMP Configuration option on the Terminal Applications menu enables you to specify the

following parameters for SNMP processing:

• Enabling and disabling SNMP

• Defining read, write and trap community names

• Defining and deleting up to four trap destination IP addresses

• Enabling and disabling SNMP traps

Table 5.1: AMX Switching System Configuration ID

System Configuration ID

system 1 000001

system 2 000002

system 3 000003

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 157 158

Sin comentarios

Avocent AMX Switch Series Guía de usuario Pagina 56