Avocent SwitchView IP 1020 Guía de usuario descargar pdf (Pagina 26)

20 SwitchView IP Installer/User Guide

Figure 2.6: Network Window

5. The SwitchView IP will automatically obtain an IP address from DHCP

services and use it as the SwitchView IP address. The previous IP address is

stored until the Set Static IP option is enabled.

To disable DHCP conﬁ guration:

1. In the web browser Address bar of a client computer, enter the IP address of

the SwitchView IP and click Enter.

2. In the Enter Network Password dialog box, type admin (default username)

and password (default password) and click OK.

3. From the Global Settings window, under Category, click Network.

4. Select the Set Static IP option and use the previous IP address, gateway and

subnet mask settings, or enter new IP address information and click Apply.

5. Log in to the static IP address and the SwitchView IP Web Server will

refresh with the new IP address.

Accessing Through a Firewall

Before attempting to access the SwitchView IP through a firewall, verify that

the following Internet ports are available and configured for Transmission

Control Protocol (TCP) traffic or packets.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Sin comentarios

Avocent SwitchView IP 1020 Guía de usuario Pagina 26