Avocent PS/2 KVM Manual de usuario descargar pdf (Pagina 32)

Single port PS2 KVM over IP

Figure 5.12: PS/2 KVM over IP switch network settings

. IP auto configuration

With this option you can control if PS/2 KVM over IP switch should fetch its network settings from

a DHCP or BOOTP server. For DHCP you have to enter dhcp and for BOOTP supply bootp

accordingly. If you specify none then IP autoconfiguration is disabled.

. IP address

IP address in the usual dot notation.

. Subnet mask

The net mask of the local network.

. Gateway IP address

In case the PS/2 KVM over IP switch should be accessible from networks other than the local

one, this IP address must be set to the local network router’s IP address.

. Primary DNS Server IP address

IP address of the primary Domain Name Server in dot notation. This option may be left empty;

however PS/2 KVM over IP switch won’t be able to perform name resolution.

. Secondary DNS Server IP address

IP address of the secondary Domain Name Server in dot notation. It will be used in case the

Primary DNS Server can’t be contacted.

. Remote Console & HTTPS port

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

Sin comentarios

Avocent PS/2 KVM Manual de usuario Pagina 32