Avocent AMX5000 Guía de usuario Pagina 63
- Pagina / 248
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3: Operations 51
-or-
Click C
ancel to exit the OSCAR interface without saving changes
5. If you connected a Pinnacle FAK keyboard, complete the following steps:
a. Click the Ad
min tab.
b. Select the target device that
will be running software that requires Pinnacle FAK support.
c. Click Edit device.
d. Select Pinnacle FAK
from the Emulation drop-down menu. You can only edit the
emulation mode if the device-type is PS/2. (If you are using a Chyron Duet keyboard, the
Emulation mode should be Standard.)
6. To save changes, click Appl
y. To exit the OSCAR interface, click Cancel or X.
Keyboard translation
The AMX user station allows you to use PS/2 or USB keyboards to operate any type of attached
target device. However, when crossing platforms, certain keys will need to be remapped in order to
provide all of the functions available on the keyboard native to that platform.
For example, if you access a Sun workstation
with a PS/2 keyboard, you will notice that the PS/2
keyboard does not have the
Stop and Again keys that are on a true Sun keyboard. By enabling the
Scroll Lock mode by pressing
Ctrl-Alt-Shift and Scroll Lock at the same time, the F1 and F2 keys
on the PS/2 keyboard function as the Sun
Stop and Again keys. With Scroll Lock mode disabled,
F1 and F2 function normally.
NOTE: The Scroll Lock LED blinks if the mode is enabled.
Table 3.3 shows the translations for a PS/2 keyboard to a Sun server. All mapped functions will
only be valid when the Scroll Lock mode is enabled.
Table 3.3: PS/2 Keyboard to Sun Server
Key Sun Key Sun
F1 Stop F9 Find
F2 Again F10 Cut
F3 Props F11 Power
F4 Undo F12 Command
F5 Front keypad * Compose
F6 Copy NUMLOCK Help
F7 Open keyboard / Mute
F8 Paste keyboard - Vol -
F8 Paste keyboard + Vol +
AMX.book Page 51 Thursday, June 12, 2008 4:14 PM
- Switch Series 1
- Switch Series 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 9
- List of Tables 11
- Product Overview 13
- Glossary 15
- Component Overview 16
- The AMX switch 17
- The AMX user station 17
- The AMX switch IQ modules 18
- UTP cables 18
- Safety Precautions 19
- AMIQ-SRL modules 22
- Rack Mounting an AMX Switch 25
- Installing an AMX Switch 25
- Support for assistance 27
- AMX Switch 33
- Installing AMWorks Software 38
- Configuring AMWorks software 39
- Using nVision routers 40
- Unit LEDs 41
- AMX user station 42
- IQ module 43
- Operations 45
- OSCAR interface tabs 46
- Target Devices 47
- Ctrl+Up hotkey 49
- Setting a local switch hotkey 50
- Setting a target flag 51
- Scanning the switching system 53
- tab, then select Scan 53
- button to begin scanning 53
- Figure 3.10: User Screen 54
- Logging in as a user 55
- Logging out 56
- Managing the user database 56
- Figure 3.13: Add User Screen 57
- Configuring Keyboard Settings 60
- Keyboard type 62
- Keyboard translation 63
- User Stations 67
- Locking user station settings 68
- Persistent mode 69
- Setting Device Properties 70
- OSD Command Line Operations 73
- Accessing the Command Line 74
- Disabling Auto User Login 75
- Equalization tuning 75
- Deskew tuning 76
- Configuring the DDC table 77
- Code Definition 81
- Terminal Operations 83
- Appendices 87
- Appendices 77 89
- Appendices 79 91
- Appendices 81 93
- Appendices 83 95
- AMIQ-SRL module modes 97
- Configuration Screen 99
- AMIQ-SRL module pinouts 100
- Language support 101
- Appendices 91 103
- Appendix D: Pod Switch Mode 105
- Enabling Pod Switch mode 107
- Performing a Pod Switch 107
- Appendix E: Troubleshooting 109
- Appendices 99 111
- Appendix F: Command Functions 112
- Appendices 101 113
- Appendix G: Technical Support 115
- Index 107 119
- Index 109 121
- USA Notification 123
- Canadian Notification 123
- Japanese Approvals 123
- Commutateurs de la série AMX 125
- Table des Matieres 127
- Table des Matieres v 129
- Liste des Figures 131
- Liste des Tableaux 133
- Présentation du produit 135
- Glossaire 138
- Présentation des composants 138
- Commutateur AMX 139
- Console utilisateur AMX 140
- Câbles UTP 140
- Mesures de sécurité 141
- Installation 143
- Entrée 148
- 00000 en tant 149
- Les consoles 162
- Pinnacle ou Chyron 162
- Voyants de l’unité 164
- Module IQ 166
- Fonctionnement 167
- Onglets de l’interface OSCAR 168
- Équipements cibles 169
- Accès aux équipements cibles 170
- Configure 172
- pour lancer le balayage 176
- Utilisateurs 177
- Déconnexion 178
- Figure 3.13 : Écran Add User 179
- Configuration clavier 182
- Type de clavier 184
- Traduction du clavier 186
- Alimentation 187
- Consoles utilisateur 190
- Mode persistant 192
- Réglage de l’égalisation 198
- Réglage du réalignement 199
- Configuration du tableau DDC 200
- Opérations de terminal 205
- Annexes 79 213
- Annexes 81 215
- Annexes 83 217
- Annexes 85 219
- Modes du module AMIQ-SRL 221
- -Saut de ligne) 222
- Brochage du module AMIQ-SRL 225
- Compatibilité multilingue 225
- Annexes 93 227
- Introduction 229
- Configuration requise 229
- Configuration 230
- Annexes 97 231
- Verr Num +. Pour de 231
- Alt + 1 232
- Annexe E : Dépannage 233
- Annexes 101 235
- Annexes 103 237
- Annexes 105 239
- Index 111 245
Relacionado con productos y manuales para Los Conmutadores Kvm Avocent AMX5000
Los Conmutadores Kvm Avocent 2015 Guía de usuario
(134 paginas)
(134 paginas)
Los Conmutadores Kvm Avocent 1000 Guía de usuario
(20 paginas)
(20 paginas)
(2 paginas)
Los Conmutadores Kvm Avocent DSR1021 Guía de usuario
(72 paginas)
(72 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales